The linear guide rail belongs to high quality, convenient use, safety products. In order to ensure more safely, please pay attention to the following matters.
Lubrication
1, when the oil lubrication, according to the installation state of the slider,sometimes oil can not reach orbit. If this is the case, please negotiate with NSK.
2, such as delivery products has been coated with antirust oil, antirust oil wipe clean first before use, and then packaging lubricating oil after use.
Matters needing attention
3, please use the temperature limit set at 80 degrees below (in addition to heatspecifications of products). Above this temperature, the plastic cover can be damaged.
4, the slider in the suspended state (such as the fixed slider on the ceiling downwhen in use), such as million end cover is damaged, the ball can roll out, resulting in the slider from the rail off. For this purpose, please take additional safety equipment and corresponding measures.
5, when in use, please try to avoid entering the dust or foreign matter.
6, when the customers own severed guide, cut off please burrs on the cutting surface and become warped edge completely clean.
Safekeeping
Such as the rails in bad condition, will cause the deformation of the rails. During the storage, it should be placed in the appropriate plane, horizontal placement.
Assemble
7, sometimes only inclined rail, the slider moves, so this time should be careful not to slide off the rail.
8, the standard cover is made of plastic. Such as beating or collision, will make itsdamaged, it should be noted.
9, product interchangeability (namely the guide rail and the slider can be arbitrarymatching products) is mounted on the slider to temporary shaft form. Therefore, incombination with the guide, please be more careful.
10, such as unauthorized disassembly parts, will cause the dust entering ordecrease the parts of composite precision, therefore, cannot but not the situation,please do not easily disassembly.
Hot Model No.: